The Flow-Pure depth filter cartridge was manufactured by four different pore diameter of spray nozzle.
The four-layers structure PP depth cartridge is functioned with fine fibers in inner layer and coarsefibers in outer layer which constitutes four different pore diameter in order to filtrate particles in different layer. This design has high contaminant holding capacity. Therefore, the filter has a longer service life and lower pressure drop.
100% Polyproylene for compatibility with a wide range of process fluids.
Formed by thermal bond without use of any binders and adhesives.
Certificated by NSF42 and FDA CFR Title 21.
Operation conditions
Maximum operating forward pressure drop : 60。C : 1.8 kg/cm2 /20。C : 3.2 kg/cm2
Recommended replaceable pressure drop : 1.5 kg/cm2
Maximum operating temperature : 60。
Applications ons of product
- Electroplating, etching, and image development processes in PCB industry. - Filtration of electroplating fluid in conventional electroplating industry. - Pre-filter of DI & RO water filtration system for industry. - Filtration of low viscosity fluids of chemical. - Filtration of water for manufacturing processes and recycled water.
product Specifications
- Micron ratings：nominal 0.5,1,3,5,10,25,50,75,100 micron - Materials of construction : 100% melt-blown micro-denier PP fiber - Length：9.87", 10", 20", 30",40" (251 mm,254 mm,508 mm, 762 mm,1016 mm) - Inner Diamter : standard 28mm, cuatomization sizes available. - Outer Diamter : standard 63mm /115mm, or cuatomization sizes.
